Switch it Ersatzteile Brücke

loopia car park

Ucrania es la elite de la información de contacto de vídeo y de la información de contacto de la empresa, está en los servicios de loopshois. ¿Debería ser la mejor opción para usted y su familia? Seleccione el cuadro de mando y ejecute el plano. Alojamiento de paquetes de alojamiento sadr?e sve sve ?to vapor je potrebno kako biste pokrenuli sajt, correo electrónico, blogs ili en línea prodavnicu.

Aktuellste Information

Durch die Teichmann-Gruppe haben wir ein ausgedehntes Lager und Zugang zu dem größten europäischen Ersatzteilelager der Kräne. Durch die Teichmann-Gruppe haben wir Zugang zu dem größten europäischen Ersatzteilelager für die Kranbranche mit einem einmaligen Lager an Mechanik- und Elektrokomponenten von nahezu allen Kranherstellern und Zulieferern. Jahrzehnte lange partnerschaftliche Zusammenarbeit mit Produzenten und Kontaktpersonen und ein ausgezeichneter Name als Kunden und Fachhändler bei Produzenten "bieten Ihnen die Chance, auf einen Dienst zurückgreifen zu können, der nicht nur nach der geeigneten Bestellnummer des Bauteils verlangt, sondern auch souverän ansprechbar ist.

Benutzen Sie unseren Kundendienst auch für Ersatzteile der jeweiligen Fabrikate:

Forbidden to reproduce! Réproduction interactive!

Bewahren Sie diese Anleitung für den zukünftigen Gebrauch auf! Achten Sie bei der Montage und Inbetriebsetzung auf Erschütterungen und jegliche Gewalteinwirkung. Der Einbau darf nur von Fachhändlern durchgeführt werden ausgeführt! Für die Montage benötigen Sie 4 - 8 Stück DC 120 V/650 Watt PAR-36 VFL. Beim Einbau sind besonders die Vorschriften der Berufsgenossenschaftlichen Vorschrift für Geräte der Berufsgenossenschaft 01 (ehemals BGG 70) und der Norm für Geräte nach EN ISO 0711-217 zu berücksichtigen!

Der Einbau darf nur von einem Fachhändler ausgeführt durchgeführt werden! Der Einbau muss immer mit einem zweiten, unabhängigen Aufhängung, z.B. einem passenden Sicherheitsnetz, durchgeführt werden. Die zweite Aufhängung muss so konzipiert und installiert werden, dass bei einem Ausfall kein Teil der Anlage herunterfallen kann. Versucht nie, die Montage selbst durchzuführen, wenn ihr nicht über eine solche Qualifizierung durchführt.

Bei der Montage von Gerätes ist darauf zu achten, dass keine leicht entzündlichen Stoffe (Dekoration etc.) in einem Mindestabstand von 0,5 m vorhanden sind. Wird Gerät unmittelbar an die örtliche Stromversorgung angebunden, muss in der festen Elektroinstallation ein Trennschalter mit einer Kontaktöffnung von min. 3mm pro Pole installiert werden.

If spare parts are required, please use only original spare parts. Do not expose this unit to humidity or wet! Before opening the casing, disconnect the power plug! Please for your own security please thoroughly peruse these operating instructions before the first start-up. You' ll find that you've purchased a high-performance and flexible one.

Unwrap your SUVENCE BINDER. Please make sure that no transport damages occur before the first commissioning. If this is the case, contact your retailer and do not use the unit. Use caution in your surgeries. If you touch the wire, you can get a hazardous electrical hazard!

The unit has been delivered in absolute flawless state. To keep this state and to guarantee reliable functioning, it is essential that the operator observes the warnings and precautions in these operating conditions. Important: Damage resulting from non-observance of these operating manuals is not covered by the guarantee.

Do not switch on the unit immediately if it has been subjected to severe fluctuations in temperatures (e.g. after transport). This condensate can cause damages to your unit. Keep the unit off until it reaches room warm. It is important that the yellow/green wire is grounded.

Electrical installation must be performed by a specialist. Do not allow the AC cable to come into touch with other wires! Treat the AC cable and all connectors with special care! Ensure that the available supply current is not higher than indicated on the back. Do not crush or damage the AC adapter cable with clear corners.

Inspect the unit and the AC cable from timewise. Unplug the unit when not in use or before you clean it. It is a standard procedure and does not necessarily mean that the unit is faulty. OPERATIONAL CONDITIONS This unit is a light effect for generating ornamental effect.

Do not use this products with AC power of 230 volts, 50 cycles per second and is for use indoors. The unit is conceived for professionals, e.g. on stage, in discos, theaters etc. Constant interruptions to operations guarantee that the unit is available to you error-free for a long period of it.

Then switch the unit off and allow it to dry for 3 min. Never jiggle the unit. Do not use excessive force to install or operate the unit. Do not expose the unit to excessive temperature, humidity or dusts when selecting the mounting location. You' re endangering your own and others' security!

There must be a min. clearance of more than 2 metres between the exit of sunlight and the lit area. Ensure that the area below the mounting location is locked when upgrading, dismantling or maintaining the unit. Use a suitable securing cable to secure the device. Do not exceed the max. environmental temp. ta = 25°C.

Do not use the unit until you have become acquainted with its features. Never allow anyone who is not authorized to use the unit. When transporting the unit, please use the packing material. For security purposes, unauthorised changes to the unit are prohibited! Use of this equipment in a manner other than that described in this instruction guide may damage the equipment and voids the warranty.

Only a skilled electrical engineer may carry out the fitting! Always switch off the unit before installing the lights! Disconnect the power plug first! Disconnect the power plug before changing the bulb and allow the bulb to allow to dry (approx. 20 minutes). Avoid touching the light bulb with your naked hands during assembly!

Avoid installing higher power bulbs! Higher power bulbs produce temperature that the unit is not made for. You will need 4 - 8 FREE 8 Watt RGB bulbs 4 - 8 Watt RGB PAR-36W. 4: Use a suitable screw driver to attach the cables to the light. Never use this unit without the light cap up!

When installing, please observe the requirements of the standard IEC 60598-2-17 and the relevant local standards! Only an authorised specialist retailer may carry out the sockets! Install the projectors in such a way that they can support 10 x the mass for 1 hours without deforming.

At all times, the system must be protected with a protective device, e.g. a suitable net. The design of this subsidiary containment unit must be such that no part of the system can drop if the primary containment unit should fail. If the luminaire is to be upgraded, dismantled or serviced, it is prohibited to stay below the place of use, on footbridges, under high workplaces or in other hazardous areas.

It is the operator's responsibility to ensure that security-related and machine-related systems are inspected by an authorized inspector prior to initial commissioning and after modifications prior to recommissioning. It is the operator's responsibility to ensure that security-related and machine-related systems are inspected by an authorized inspector every four years as part of an inspection.

It is the operator's responsibility to ensure that security-related and machine-related systems are inspected by a specialist once a year. OVERHEIGHT FREE overheight free RIGGING demands EXTENSIvely experienced personnel, which includes (but is not restricted to) the calculation of the maximum working loads, the materials used for installing and the regular security check of all equipment and the projectors. When you are lacking these skills, do not try the install yourself, but use a qualified engineer.

Incorrect installations can cause personal injuries and material damages. Never mount the unit so that it can swing indoors. When in doubt about the security of a possible setup, DO NOT do this! Prior to upgrading, make sure that the mounting area can support a minimal point loading of 10 x the mass of the projectors.

During installation of the unit, make sure that there is no flammable materials (decorative items, etc.) at a minimum spacing of 0.5 inches. In the case of upside-down installation, always fit a securing cable that can take up at least 12 x the light's mass.

Only security cables with quick-release fasteners with threaded fasteners may be used. Do not secure at both ends. Do not allow the falling height to reach more than 20 cm. Do not use a belay that already holds the load of a collash or is faulty. Electrical connections may only be made by a skilled electrical engineer!

You must have an AC adapter installed to be able to operate the unit. Reconnect the unit to the AC outlet with the AC adapter. When the unit is directly plugged into the domestic electricity grid, an isolating switch with a 3 mm opening at each terminal must be incorporated into the fixed electric system.

Light fixtures must not be attached to dimmer packages. OPERATING After you have plugged the unit into the power supply, you can use your light controls to operate the spotlights. REINIGUNG UND Wartung The user must ensure that security-related and machine-related systems are checked by an authorized inspector every four years as part of an inspection.

It is the operator's responsibility to ensure that security-related and machine-related systems are checked once a year by a specialist. Corroded. 2 ) No deformation of enclosures, fastenings and mounting points (ceiling, hangers, sediments) must occur. Any further directions, according to the place of assembly and application, must be followed by a specialist and any security issues must be rectified.

Unplug from the power supply before commencing servicing! It is recommended that the unit be frequently washed. At least once a year, the inside of the unit should be vacuumed or blown with compressed out. Inside the unit there are no maintainable parts other than the light. Servicing and servicing work may only be performed by authorised specialist retailers.

In the event of damage to the AC cord of this unit, it must only be changed by an authorised service centre to prevent damage. If you have any further queries, please consult your local retailer.